McLaughlin New Way K-PAC KP03, Руководство пользователя

Страница: 68 / 95

KP03 Mini Apartment Compactor
SERVICE
63
Copyright
©
7/2021 K-PAC
™
Compactors, a product of McLaughlin Family Companies
All Rights Reserved
Use the remaining 9 menu names to access the timer and cycle settings. The following menu names can be
selected using the navigation buttons (Figure 35, 1) to select.
EXTEND MENU - The Extend menu (Figure 36, 1) is the
first menu to appear. The menu sets the time the ram cyl-
inders will extend. To change the time, press the OK but-
ton
(Figure 36, 2) and a cursor should appear on the
extend time box (Figure 36, 3) . Use the Up and Down
navigation buttons (Figure 36, 4) to increase or decrease
the time. The left or right arrows will allow you to make
finer adjustments in tenths and hundredths of a second.
The default setting is 10 seconds. After the desired time
is obtained, press the OK button again to accept settings.
All of the following timers and counters are adjusted in
the same manner as previously described. The order in
which they are described will correspond with the use of
the Down navigation button.
Figure 36
RETRACT MENU - The Retract menu (Figure 37, 1)
sets the time the ram cylinders will retract. The default
setting is 6.04 seconds
(Figure 37, 2) . After the desired
time is obtained, press the OK button (Figure 37, 3)
again to accept settings.
Figure 37
MENU DESCRIPTION
EXTEND Controls the time the ram cylinders will extend. The default setting is 10 seconds.
RETRACT Controls the time the ram cylinders will retract. The default setting is 6.04 seconds.
AUTO C Controls the number of cycles that the unit will complete when you depress the start
button or the photo-eye is tripped. The default setting is 3 cycles.
80% CNT Controls when the 80% light comes ON. The default setting is 5.
80% LITE Is the timer that controls the time the signal is received before it is sent to the 80% CNT.
The default setting is 5 seconds.
100% CNT Controls when the 100% light comes ON. The default setting is 6.
100% LIT Is the timer that controls the time the signal is received before it is sent to the 100% CNT.
The default setting is 6.05 seconds.
P-EYE The function will shut down the compactor if the photo-eye becomes blocked for more
than a period time. The default setting is 5 minutes.
P-DELAY Time the compactor will delay the auto-cycle if triggered by the optional photo-eye.
4
2
1 3
1
3
2