- 5 -
- 6 -
MLX-1000
Head unit
Front
Rear
Front
tweeters
Rear
tweeters
Front
woofers
Rear
woofers
System 2
System 2 shows the general 4 speaker system with 4 amplifiers. In this system, set the Sub woofer
Input selector of the
MLX-1000
to OFF and front input selector to the ON position. If you want to get
the more powerful bass sound from the rear speakers, set the low boost selector to the
SUB & REAR
position to make the LOW BOOST control work towards the rear speaker. For the Front and Rear
crossover point selectors, set them to FLAT position in this system.
MLX-1000
Head unit
Rear
Front
tweeters
Front
woofers
System 3
Sub
woofer
This system consists of three power amplifiers, front speakers, rear speakers, and a sub woofer.
Head unit employed here has only one pre amplifier output connector. When you use one pre
amplifier output connector. When you use one pre amplifier output unit, it should be connected to
the Rear input connector of the MLX 1000. For input selectors, set the Front and Sub woofer Input
selector to OFF position. The result is all outputs from the MLX 1000 are the signals from the
REAR input connector.
Set the Front and Rear crossover point selectors to the FLAT position.
When you incorporate a monaural sub woofer into the system, as shown in this example, set the
Sub woofer Stereo/mono selector to the Mono position.
In the of system 1, set the FRONT INPUT selector to the ON position regardless of the number of
pre amplifier output.
Power connection
B+(12V)
:
Connect a red wire to the car battery or other power source.
REMOTE
:
Connect an orange wire to remote activating (12V DC)wire of car
stereo or equalizer.
GND
:
Connect a black wire to the car chassis for ground connection.
ELECTRONIC CONNECTIONS & WIRING
Red
Orange
Black
