TECHNICAL NOTE – OPERATION OF MT4000 TWTA
10/24/03
TN4000-3
MCL, INC.
16 of 46
3.2.6 Adjustment Menu Screen
This screen is accessed from the menu screen. When the screen shown below is displayed the
operator can select which parameter to modify from those listed on this menu. Notice there are
seventeen menu selections, but the screen can only display four at a time. By rotating the knob
CW these selections will scroll up one at a time, and CCW down one at a time. Once the cursor
is pointing at the desired selection the operator will press the Accept button. This will cause the
selected screen to be displayed. If the operator were to press the menu select button from this
screen the menu screen would be displayed again.
3.2.7 Adjustment Edit Screen
These screens are accessed from the adjustment menu screen. The screen shown below is a
typical EDIT screen for an adjustable parameter. While one of these screens is displayed the
operator can use the adjustment knob to change the parameter shown on the fourth line. The
adjusted value will take effect once the accept button is pressed. The third line is the value of the
parameter before it is adjusted. The second line is the meter associated with the parameter being
adjusted. The first line is the name of the parameter being adjusted. If the operator were to press
the menu select button from this screen the adjustment menu screen would be displayed again.
