7
7. Remove the protective rubber tips from the four pre-installed bolts. (A pair of
bolts protrude from each of two metal plates in the front of the cabinet.)
8. Carefully, position the Tweeter/Midrange array over the four bolts. Note the
correct orientation is with the tweeter array above the midrange array. (FIG.7)
9. Place a locknut on each bolt and using the supplied lock nut driver tool, tighten
the four Lock Nuts. Do Not Over Tighten. When snug, stop. (FIG.8)
10. Cover each tightened lock nut with a magnetic cover.
11. Connect the two upper and two lower cables into the sockets on the back
of the Midrange/Tweeter Column. Red color coded labels mark the red cable
connectors.
12. There are five different elevation positions for the loudspeaker, which are
selected using the two knobs placed on the base aluminum supports:
Loosening and removing the knobs, you can adjust the speaker position sliding
the cabinet on the base supports. Once you've selected the position (0° - 7.5° - 15°
- 22.5° - 30°), place the knobs in related hole and screw until the speaker is fixed.
(FIG.9)
FIG.7
FIG.8
FIG.9
