12
Figure 9– UPDATE submenu
UPDATE Menu
The UPDATE menu allows you to reset settings to
the factory defaults as well as update your RS150.
To restore Factory settings, select the “
Start Factory
Reset
” button. Done. Note that you will lose your
Wi-Fi settings.
An alternative method for Factory Reset, is to Press
and Hold the Left and Right Knobs for 10 seconds.
Update Method
allows you to set how the RS150
updates its firmware. When set to the default of
OTA
Auto
, the RS150 will periodically check for updates
and install them automatically. When set to
OTA
Manual
, the RS150 will check for available updates
when you select the
Start Search
button to the right
of
Check for Update
. If an update is available, you
can install it by selecting
Start Update
. (OTA stands
for “over-the-air”.)
The
Service
option for updating is for service
purposes by a McIntosh qualified technician only.
While the RS150 is in the process of updating the
firmware, the power status LED will blink twice
in quick succession, pause for 2 seconds, and then
repeat during the entire process.
