![McIntosh MVP901 Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/mcintosh/mvp901/mvp901_owners-manual_1755468009.webp)
9
Installation
Installation
The MVP901 can be placed upright on a table or
shelf, standing on its four feet. It also can be custom
installed in a piece of furniture or cabinet of your
choice. The four feet may be removed from the bottom
of the MVP901 when it is custom installed as out-
lined below. The four feet together with the mounting
screws should be retained for possible future use if the
MVP901 is removed from the custom installation and
used free standing. The required panel cutout, ventila-
tion cutout and unit dimensions are shown.
Always provide adequate ventilation for your
MVP901. Cool operation ensures the longest possible
operating life for any electronic instrument. Do not
install the MVP901 directly above a heat generat-
ing component such as a high powered amplifier. If
all the components are installed in a single cabinet, a
quiet running ventilation fan can be a definite asset in
maintaining all the system components at the coolest
possible operating temperature.
A custom cabinet installation should provide the fol-
lowing minimum spacing dimensions for cool opera-
tion.
Allow at least 6 inches (15.24cm) above the top, 2
inches (5.08cm) below the bottom, 3 inches (7.62cm)
behind the rear panel and 2 inches (5.08cm) on each
side of the Audio Video Player, so that airflow is not
obstructed.
Do not block the ventilation holes on
the top and bottom cover.
Allow 1 inch (2.54 cm) in
front of the mounting panel for clearance. When the
DISC Tray is opened, the panel clearance required in
front of mounting panel is 6-3/4 inches (17.2cm).
Be
sure to cut out a ventilation hole in the mounting
shelf according to the dimensions in the drawing.
MVP901 Front Panel
Custom Cabinet Cutout
8"
20.3cm
15"
38.1cm
3/4
"
1.9cm
Cutout Opening
for Ventilation
Cutout Opening for Ventilation
Support
Shelf
Cabinet
Front
Panel
Chassis
Spacers
MVP901 Side View
in Custom Cabinet
MVP901 Bottom View
in Custom Cabinet
1-
1/8
"
2.8cm
1-
3/8
"
3.5cm
Note: Center the cutout Horizontally on the unit.
For purposes of clarity, the above
illustration is not drawn to scale.
Opening
for Ventilation
6"
15.24cm
10-
7/8
"
27.62cm
17-
1/16
"
43.34cm
Cutout Opening for Custom Mounting
Cabinet Front Panel
Opening for Ventilation
32 45
1 2 1
Opening for Ventilation
8-
3/8
"
21.2cm
13-
1/2
"
34.3cm
Содержание MVP901
Страница 23: ...23 Notes ...