McIntosh MI-3, Руководство пользователя

Страница: 6 / 16

FRONT
PANEL
INFORMATION
INDICATOR SCREEN—The screen is the face of a cathode
ray tube. Calibration marks are provided to allow correct
positioning of the indicator trace.
A correctly tuned station free of multipath distortion appears
as a smooth curve centered on the indicator screen vertical
scale. The vertical line is marked to show the relative strength
of the FM signal. A strong local signal should position the dis-
play about ½ to ¾ inch from the top of the vertical scale.
The horizontal line is marked to show deviation.
The two 45° sloped lines show L+R and L — R audio information.
SCOPE TEST—This control switches the indicator circuits to
show multipath, Left and Right audio signals or TEST. The
TEST position switches the indicator trace to a single dot for
adjustment of trace position, focus and intensity. Different
trace reference positions are necessary for multipath and
L + R Audio.
HORIZONTAL POSITION—This control moves the indi-
cator trace to the left or right. With the Scope Test switch in
TEST position, the trace dot tan easily be centered on the
indicator screen.
VERTICAL POSITION—This control moves the indicator
trace up or down. With the Scope Test switch in TEST posi-
tion the indicator trace can be easily moved to the correct
vertical position. For multipath display the trace is positioned
at the bottom reference point.
For audio indications the trace is positioned at the center
reference point. This shift in position occurs automatically as
the Scope Test control is turned. An internal adjustment
labeled L+R position is factory preset but can be readjusted
if needed.
INTENSITY —This control adjusts the brightness of the indi-
cator trace. After the Intensity control has been tuned, the
Focus control may have to be adjusted for the best possible
indicator trace.
FOCUS—This control adjusts the sharpness and clarity of
the indicator trace. Focus is easiest with the Scope Test
switch in the TEST position.
AUDIO DISPLAY—This control will increase the display
area on the face of the cathode ray tube. At low volumes
you will Find the display would be small. To see all the in-
formation present turn the AUDIO DISPLAY toward max.
This will increase the size of the display. At high volumes you
may want to turn down the AUDIO DISPLAY to reduce the
size of the display.
4