McIntosh MCT80, Руководство пользователя

Страница: 18 / 24

18
2. To cancel the previously selected Repeat Mode,
press the REPEAT Push-button until the character
“1” and/or the symbol “
N
” in the Front Panel Infor-
mation Display is extinguished.
Random Playback
This feature allows for listening to Tracks of a Disc in
a Random Order. Refer to figure 25.
Note: Before the Random Playback Mode feature on
the MCT80 can be activated, the disc must be
stopped or the message “Press
<
(stop) first”
will momentarily appear on the Front Panel Dis-
play. Refer to figure 26.
1. With the MCT80 in the STOP
<
Mode press the
RANDOM Push-button. The word RANDom will
be indicated in the Front Panel Display. Refer to
figure 27.
How to Operate the MCT80, con’t
Figure 23
1 0 m 0 5 s 1
Figure 24
1 0 m 0 5 s
1 2 5 8 m 3 2 s
Figure 27
P r e s s f i r s t
Figure 26
Figure 25
Direct Track Selection
The MCT80 Front Panel Display indicates the Disc
Track currently playing. Use the Remote Control
NUMERIC Push-button(s) to enter the desired Track
Number. Refer to pages 14 and 15 for additional infor-
mation using the Remote Control.
Repeat
This allows repeating a Track, Disc, Program Mode
or Random Play Mode on a continuous basis. Refer to
figures 2 and 25.
1. With the disc playing (Regular, Program or Ran-
dom Playback Modes), press the REPEAT Push-
button once to activate the Track Repeat (
N
1); press
the REPEAT Push-button twice to activate the Disc
Repeat (
N
). Refer to figures 23 and 24.
Figure 2
2. Press the PLAY/PAUSE
„
/
;
Push-button to start
Random Playback. After all the tracks have been
played the MCT80 will stop.
Notes: 1. To provide continuous
playback of the disc, press
the REPEAT Push-button
twice to activate the Disc
Repeat (
N
) after the Random
Playback Mode has started.
If Repeat (
N
1) is selected, the
current track will repeat.
2. The NEXT TRACK
:
func-
tion will advance to the next
random selection and start
playing.
3. To cancel the Random Playback
Mode, press the STOP
<
Push-
button, then press the RANDOM
Push-button twice.
Program Playback
This feature allows for playback of
selected Tracks on a Disc in the desired
order. In the following example, a Disc
is programmed to play Track 6 followed
by Track 4 and then Track 2.
Notes: 1. The MCT80 must be in STOP
Mode with the Disc TOC (Table
of Contents) read before the Program Playback
Mode Feature can be activated.
2. When programming Hybrid SACD Discs, first
choose the layer (SACD or CD) so the correct
TOC can be read, as some discs have different
selections for the SACD and CD Tracks.
1. Press the RANDOM Push-button twice to access
the Program Mode. Refer to figures 2, 25 and 28.
2. Enter the first desired selection (track 6) using the
Numeric Push-buttons. The Front Panel Display