background image

3

Copyright 2018 © by McIntosh Laboratory, Inc.

Table of Contents

Thank You

Your decision to own this McIntosh MCT500 SACD/

CD Transport ranks you at the very top among 

discriminating music listeners. You now have “The 

Best.” The McIntosh dedication to “Quality,” is assur-

ance that you will receive many years of visual and 

musical enjoyment from this unit.

Please take a short time to read the information in 

this manual. We want you to be as familiar as pos-

sible with all the features and functions of your new 

McIntosh.

Please Take A Moment

The serial number, purchase date and McIntosh Dealer 

name are important to you for possible insurance 

claim or future service. The spaces below have been 

provided for you to record that information:
Serial Number: ______________________________

Purchase Date: ______________________________

Dealer Name: _______________________________

Technical Assistance

If at any time you have questions about your McIntosh 

product, contact your McIntosh Dealer who is familiar 

with your McIntosh equipment and any other brands 

that may be part of your system. If you or your Dealer 

wish additional help concerning a suspected problem, 

you can receive technical assistance for all McIntosh 

products at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-1545

Fax: 607-724-0549

Customer Service

If it is determined that your McIntosh product is in 

need of repair, you can return it to your Dealer. You 

can also return it to the McIntosh Laboratory Service 

Department. For assistance on factory repair return 

procedure, contact the McIntosh Service Department 

at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3515

Fax: 607-723-1917

Safety Instructions ..................................................... 2

    (Separate Sheet) ...................

Important Additional

                                    Operation Information Guide

Thank You and Please Take a Moment ...................... 3

Technical Assistance and Customer Service ............. 3

Table of Contents ....................................................... 3

General Information .................................................. 4

Connector and Cable Information ............................. 4

Disc Information ..................................................... 4-5

Introduction ................................................................ 5

Performance Features ................................................ 5

Dimensions ................................................................ 6

Installation ................................................................. 7

Connections:

Rear Panel Connections ............................................. 8

Connections using to Analog Preamplifier

  and Integrated Amplifier ........................................10

Connection Diagrams (Separate Sheet)

 ............. Mc1A

Connections using to Digital Preamplifier ...............11

Connection Diagram (Separate Sheet)

 ............... Mc1B

Front Panel Features:

Front Panel Display, USB Connector

  and Push-buttons .....................................................12

Front Panel Information Display ...............................13

Remote Control:

Remote Control Push-buttons for CD Disc

  and SACD Disc Playback .......................................14

How to Use the Remote Control for CD Disc

  and SACD Disc Playback .......................................15

Remote Control Push-buttons for Playback

  of Data CD, Data DVD Disc and USB

  Flash Memory Data Drive ......................................16

How to Use the Remote Control for for Playback

  of Data CD, Data DVD Disc and USB Flash

  Memory Data Drive ................................................17

Operation:

How to Operate the MCT500 ..............................16-21

Additional Information:

Photos .................................................................. 24-25

Specifications ........................................................... 26

Packing Instruction ...................................................27

Содержание MCT500





























Отзывы: