background image

2

IMPORTANT SAFETY INSTRUCTIONS!

PLEASE READ THEM BEFORE OPERATING THIS EQUIPMENT.

General:

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.

5. Warning: To reduce risk of fire or electrical shock,

do not expose this equipment to rain or moisture.
This unit is capable of producing high sound pres-
sure levels. Continued exposure to high sound pres-
sure levels can cause permanent hearing impair-
ment or loss. User caution is advised and ear protec-
tion is recommended when playing at high volumes.

6. Disconnect this equipment when unused for long peri-

ods of time.

7. Only use attachments/accessories specified by the

manufacturer.

Installation:

8. Do not block any ventilation openings. Install in accor-

dance with the manufacturer’s instructions.

9. Do not install near any heat sources such as radiators,

heat ducts or other equipment that produce heat.

10. Do not use this equipment near water.
11. Do not expose this equipment to dripping or splashing

and ensure that no objects filled with liquids are
placed on the equipment.

12. Do not mount this product with an unstable bracket as

the equipment may fall, causing serious injury to a
person, and serious damage to the product.

Connection:

13. Route DC power cords so that they are not likely to be

pinched by items placed upon or against them, paying
particular attention to the point where they enter the
instrument.

Care of Equipment:

14. Clean only with dry cloth.
15. Do not permit objects or liquids of any kind to be

pushed, spilled and/or fall into the equipment through
enclosure openings.

Repair of Equipment:

16. Refer all servicing to qualified service personnel. Ser-

vicing is required when the equipment has been dam-
aged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen
into the equipment, the equipment has been exposed to
rain or moisture, does not operate normally, or has
been dropped.

17. Do not attempt to service beyond that described in the

operating instructions. All other service should be re-
ferred to qualified service personnel.

18. When replacement parts are required, be sure the ser-

vice technician has used replacement parts specified by
McIntosh or have the same characteristics as the origi-
nal part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.

19. Upon completion of any service or repairs to this prod-

uct, ask the service technician to perform safety checks
to determine that the product is in proper operating
condition.

WARNING - TO REDUCE RISK OF

FIRE OR ELECTRICAL SHOCK, DO

NOT EXPOSE THIS EQUIPMENT TO

RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO

QUALIFIED PERSONNEL.

To prevent the risk of electric shock, do not remove

bottom cover. No user serviceable parts inside.

Содержание MCC301M

















Отзывы: