McIntosh MC451, Руководство пользователя

Страница: 4 / 16

4
To prevent damage to the tubes during shipping,
there is a foam insert surrounding the tubes of the
vacuum tube amplifier.
The foam insert must be removed from the
MC451 before connecting AC Power�
Failure to do so is a fire hazard, and can result
in damage to the MC451 and the surrounding
environment�
To remove the foam insert, it is necessary to
temporarily remove the tube cover. To remove the
tube cover:
1. Use a #2 phillips head screw driver to remove
the four screws (two on each side) that hold the
tube cover.
2. Pull the tube cover upward from the center of
the MC451.
MC451 UNPACK PG1.ai
3. Lift the foam insert straight up off the vacuum
tubes.
Removal of Foam Insert Over Vacuum Tubes
MC451 UNPACK PG1.ai
4. Replace the tube cover.
MC451 UNPACK PG1.ai
5. Replace the four screws to secure the cover.
6. Save the protective foam for possible future use.
MC451 UNPACK PG1.ai
MC451 UNPACK PG1.ai