McIntosh MC205, Руководство пользователя

Страница: 6 / 20

6
Installation
Installation
The MC205 can be placed upright on a table or
shelf, standing on its four feet. It also can be custom
installed in a piece of furniture or cabinet of your
choice. The four feet may be removed from the bottom
of the MC205 when it is custom installed as outlined
below. The four feet together with the mounting
screws should be retained for possible future use if the
MC205 is removed from the custom installation and
used free standing. The required panel cutout, ventila-
tion cutout and unit dimensions are shown.
Always provide adequate ventilation for your MC205.
Cool operation ensures the longest possible operating
life for any electronic instrument. Do not install the
MC205 directly above a heat generating component
such as a high powered amplifier. If all the compo-
nents are installed in a single cabinet, a quiet running
ventilation fan can be a definite asset in maintaining
all the system components at the coolest possible oper-
ating temperature.
A custom cabinet installation should provide the fol-
lowing minimum spacing dimensions for cool opera-
tion.
Allow at least 6 inches (15.24cm) above the top, 2
inches (5.08cm) below the bottom and 1 inch (2.54cm)
on each side of the Power Amplifier, so that airflow is
not obstructed. Allow 19-1/2 inches (49.53cm) depth
behind the front panel. Allow 7/8 inch (2.22cm) in
front of the mounting panel
1
for clearance. Be sure to
cut out a ventilation hole in the mounting shelf accord-
ing to the dimensions in the drawing.
1
When the MC205 is installed together with other McIn-
tosh Components, check clearances on all components
before proceeding.
8-
5/16
"
21.11cm
17-
1/16
"
43.34cm
MC205 Front Panel
Custom Cabinet Cutout
Cutout
Opening
for
Ventilation
Cutout Opening for V entilation
Support
Shelf
Cabinet
Front
Panel
Chassis
Spacers
MC205 Side View
in Custom Cabinet
MC205 Bottom View
in Custom Cabinet
12
-1/4
"
31.12cm
12
-3/8
"
31.43cm
11
-1/2
"
29.21cm
3
-3/4
"
8.57cm
Cutout Opening
for
Custom Mounting
6"
15.24cm
Opening
for V entilation
Center the
opening horizontally
with the
MC205 Chassis
15
-3/4
"
40.00cm
9
-7/8
"
25.08cm
11"
27.9cm