13
How to Operate the HR033
How to Operate HR033
Mute
Press MUTE to mute the LISTEN signals at the PREAMP
and SPEAKER Outputs. The MUTE LED above the push-
button will flash on and off to indicate that Mute is active.
Press MUTE a second time to unmute audio.
Mono
Press the MONO push-button to combine left and right ste-
reo signals to mono at the PREAMP and SPEAKER Out-
puts.
Audio
Press any of the eight Audio push-buttons to select a LIS-
TEN program source.
Video/Audio Selection
When the optional McIntosh MVS Audio/Video Selector is
added, first press VIDEO, and then the desired push-button
to select any of the five A/V sources connected to the
MVS.
CD/Tape
Use these push-buttons to operate a CD player, CD changer
or tape recorder, when the component is connected to the
MA6850 with a McIntosh RCT Translator.
Numbered Push-buttons
Press push-buttons 0 through 9 to access tuner station pre-
sets, CD tracks/discs, or operate a McIntosh Home Con-
troller.
Disc and Track
Use the DISC and TRACK push-buttons when a CD player
or changer is being used.
Tuner Push-buttons
Use with a McIntosh tuner. Select AM or FM broadcast
band. Press and release SEEK Up or Down to move from
station to station. Press and hold a SEEK push-button to
move continuously from station to station. Press REVIEW
to start the automatic brief audition of each of the presets
stored in the tuner memory. Press REVIEW a second time
to stop on a station preset and exit the Review process.
Volume
Press the Up or Down VOLUME push-button to raise or
lower the listening volume level, the Record Outputs are
not affected.
Speaker Selection
Press SPKR 1 or SPKR 2 push-buttons either separately or
together, to control the optional McIntosh Speaker Control
Relay which can switch two pairs of speakers on and off,
separately or together.
Home
When the optional HC-1 Home Controller is added to the
MA6850 system, press the SV/HM (Home) push-button to
select the HC-1. Within 5 seconds press one of the num-
bered push-buttons to activate a desired relay in the HC-1.
Acc On
Press Acc On to turn on a McIntosh Video Disc Player or
any accessory component connected using a McIntosh Re-
mote Control Translator.
NOTE: When other brands of components are connected with a
McIntosh Remote Control Translator (RCT), refer to the
RCT Owners Manual for further information on
alternate HR033 push-button functions.
All manuals and user guides at all-guides.com
