McIntosh MA6600, Руководство пользователя

Страница: 14 / 28

14
needed to go between the turntable and the high
level input “phono” on the MA6600.
1. Press the MONO/SETUP Push-button until the
Setup Mode is active. Then press the MONO/
SETUP Push-button to select the Setup Menu item
“SETUP: INPUT NAME”. Refer to figure 6.
2. Rotate
the
TRIM/
SELECT
Control
until “INPUT7 (REC ): REC” appears on the Front
Panel Information Display. Refer to figure 7.
3. Rotate the
TRIM/
TUNE
Control
until “IN-
PUT7 (REC ): SAT” appears on the Front Panel
Information Display. Refer to figure 8.
4. Press the
STORE/
EXIT
Push-
button to
exit the Setup Mode.
The MA6600 provides the ability to change the default
Input Names to match the components in your system.
In the following example the REC (Input 7) will be
renamed and appear as SAT on the Front Panel Infor-
mation Display.
Notes: 1. One of the high level Inputs may be renamed
to AUX or swiched Off. If any input is switched
Off its name will no longer appear on the Front
Panel Information Display when using the
INPUT Control, nor is it accessible with the
Remote Control.
2. When a high level input is switched Off its name
will become available to the remaining high
level inputs.
3. The Phono Input is designed for connection
of a turntable only and thus the title is not
changeable. However, the Phono Input may be
switched Off.
4. When the Phono Input (1) is switched off the
name “Phono”may be used for another input,
however an external phono preamp would be
Re-Title Inputs
Meter Illumination On/Off
The Front Panel Meter Illumination may be switched
On or Off. Follow the steps below to switch the Meter
Illumination Off.
1. Press the MONO/SETUP Push-button until the
Setup Mode is active. Then press the MONO/
SETUP Push-button to select the Setup Menu
item “SETUP: METER”.
Input Source Settings
Input
No.
Default Name New Name Trim Trigger
1 PHONO
2 CD1
3 CD2
4 DVD
5 TV
6 SERVER
7 REC
― ― ―
2. Press the MONO/SETUP Push-button until the
Setup Mode is active. Then press the MONO/
SETUP Push-button to select the Setup Menu
item “SETUP: TRIM ____ 0.0”. Refer to
figure 4.
3. Rotate
the
TRIM/
SELECT
Control until “TRIM CD1 _._” appears on the
Front Panel Information Display. If necessary,
rotate the TRIM ADJUST Control for CD1 with a
setting of “0.0”.
4. Rotate the TRIM SELECT Control until “TRIM
SERVER _._” appears on the Front Panel Infor-
mation Display.
5. Rotate the TRIM ADJUST Control until Listen-
ing Volume Level of the SERVER Input is the
same as the CD1 Volume Level. The figure 5
illustration indicates a -2.5dB decrease in the
SERVER Level.
Note: The trim LEVEL +/ - Push-buttons on the
Remote Control may also be used.
6. Rotate the TRIM SELECT Control until the name
of the next Input to be adjusted is displayed.
7. Repeat steps 5 and 6 until all the Inputs with
sources connected to the MA6600 have the same
relative volume levels when switching between
them. Record any changes made to the various in-
puts from the default settings in the “Input Source
Settings” chart in the next column.
Figure 4
SETUP: TRIM CD1 0.0
Min Max ||
Figure 5
SETUP: TRIM SRVR -2.5
Min Max ¦ ¦¦¦
Figure 7
SETUP: INPUT NAME
INPUT7 (REC ): REC
Figure 8
SETUP: INPUT NAME
INPUT7 (REC ): SAT
Figure 6
SETUP: INPUT NAME
INPUT2 (CD1 ):CD1
8. Press the STORE/EXIT Push-button to exit the
Setup Mode.