McIntosh MA 5100, Руководство пользователя

Страница: 13 / 20

CONNECTING A LOUDSPEAKER:
The MA5100 is designed for stereo operation only. Do not connect the
MA5100 for monophonic operation. Damage to the loudspeaker may
result.
Speakers are connected at the OUTPUT barrier strips on the back
panel of the MA5100.
Connect the leads from the left loudspeaker to the LEFT OUTPUT bar-
rier strip. Connect the leads from the right loudspeaker to the RIGHT
OUTPUT barrier strip. Use lamp cord, bell wire, or wire with similar
type of insulation to connect the speakers to the amplifier. For the
normally short distances of under 50 feet between the amplifier and
speaker, #18 wire or larger can be used. For distances over 50 feet
between the amplifier and speaker use larger wire.
L E F T O U T P U T
RIGTH LOUDSPEAKER
RIGHT O U T P U T
11
LEFT LOUDSPEAKER
RECORD PLAYER 1
R E C O R D P L A Y E R 2
TAPE PLAYER
(NO SELF CONTAINED ELECTRONICS)
Connect the "left" channel to the "upper" PH 1 input jack.
Connect the "right" channel to the "lower" PH 1 input jack.
PHONO 2 position is used if two record players are used in a system.
Connect the "left" channel to the "upper" PH 2 input jack. Connect
the "right" channel to the "lower" PH 2 input jack.
CONNECTING A STEREO TUNER
Plug the cable from the "left" channel tuner output into the upper
TUNER jack on the MA5100.
Plug the cable from the "right" channel tuner output into the lower
TUNER jack on the MA5100.
CONNECTING A TAPE RECORDER FOR PLAYBACK:
Plug the cable from the "left" channel recorder output into the "upper"
TAPE input jack on the MA5100.
Plug the cable from the "right" channel recorder output into the "lower"
TAPE input jack on the MA5100.
CONNECTING A RECORD PLAYER TO PHONO 1:
Connect the MA5100 TAPE output jacks to the high level inputs on
the tape recorder.
CONNECTING A TAPE RECORDER TO RECORD: