McIntosh C48, Руководство пользователя

Страница: 20 / 28

20
Refer to figure 50. The C48
remembers for each selected
Input whether the Equalizer
Circuitry is deactivated. To
reactivate the Equalizer for
the currently selected Input
Source press the EQ BYPASS
Push-button.
Note. The audio signal pres-
ent at the RECORD
OUT Jacks is unaf-
fected by the Equalizer
Circuitry.
Trim
Press the Front Panel TRIM
Push-button to activate the
C48 Trim Functions. Use
the Front Panel OUTPUT 1/
OUTPUT 2 / ◄ MENU ►
Push-buttons to select the
desired Trim Fuction and
then use the VOLUME/AD-
JUST Control to vary or make
changes. Refer to figure 50.
The Remote Control TRIM
and LEVEL +/- Push-buttons
may also be used. The LED
above the TRIM Push-button
will illuminate during Trim
selection and adjustment. Ap-
proximately four seconds after
Trim Function Selection and/
or adjustments have stopped the C48 will switch off
the Trim Mode.
given Input Source, perform the following steps:
Note: The audio signal present at the RECORD OUT
Jacks is unaffected by the Stereo/Mono setting.
1. Select the Input Source to switch from Stereo Mode
to Mono.
2. Press the TRIM Push-button repeatedly until
“MONO/STEREO MODE, ______: Stereo”
appears on the Front Panel Information Display.
Refer to figure 63.
3. Rotate the VOLUME/ADJUST Control or press
the LEVEL + / - Push-buttons to switch to MONO
Mode. Refer to figure 64.
After approximately 4 seconds the Information
Display returns to indicate the Source Selection and
Volume Level.
DIGITAL AUDIO DISPLAY
By default the Digital Audio Display is switched Off.
To display information about the type of digital signal
present when any one of the five digital inputs is se-
lected, perform the following steps:
1. Select one of the Inputs assigned to an active digital
source.
Note: The USB-D/A Input may also be selected when
the C48 is connected to a computer.
2. Press the TRIM Push-button repeatedly until
“DIGITAL AUDIO, Display Info: Off” appears
on the Front Panel Information Display. Refer to
figure 65.
3. Rotate the VOLUME/ADJUST Control or press
the LEVEL + / - Push-buttons to switch On the
Display Info. Refer to figure 66.
After approximately 4 seconds the Information
Display will return to indicate the Source Selection,
Volume Level and the Digital Information. Refer to
figure 67.
Mono
Press the Front Panel MONO Push-button to change
from Stereo to Mono Mode for the currently selected
Input Source. The LED above the MONO Push-
button will illuminate. Refer to figure 50. The C48
remembers for each selected Input whether the Mode
is Stereo or Mono. To change the Mode from Mono to
Strereo for the currently selected Input Source press
the MONO Push-button.
Note: The audio signal present at the RECORD OUT
Jacks is unaffected by the MONO Push-button.
Equalizer Bypass
Press the Front Panel EQ BYPASS Push-button to
remove the C48 Equalizer Circuitry from the signal
path for the currently selected Input Source. The LED
above the EQ BYPASS Push-button will illuminate.
How to Operate the C48, con’t
Figure 63
MONO / STEREO MODE
TUNER : Stereo
Figure 64
MONO / STEREO MODE
TUNER : Mono
Figure 65
DIGITAL AUDIO
Display Info : Off
Figure 66
DIGITAL AUDIO
Display Info : On
Figure 67
SOURCE: DVD
15% 2CH PCM
Figure 53