background image

3

Customer Service

Technical Assistance

Please Take A Moment

Thank You

Copyright 2000 

ã

 by McIntosh Laboratory, Inc.

The serial number, purchase date and McIntosh dealer

name are important to you for possible insurance claim or

future service. The spaces below have been provided for

you to record that information:

Your decision to own this McIntosh C41 Audio Control

Center ranks you at the very top among discriminating mu-

sic listeners. You now have “The Best.” The McIntosh

dedication to “Quality,” is assurance that you will receive

many years of musical enjoyment from this unit.

Please take a short time to read the information in this

manual. We want you to be as familiar as possible with all

the features and functions of your new McIntosh.

Serial Number:
Purchase Date:
Dealer Name:

If it is determined that your McIntosh product is in need of

repair, you can return it to your dealer. You can also return

it to the McIntosh Laboratory Service Repair department.

For assistance on factory repair return procedure, contact

the McIntosh Repair Department at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3515

Fax: 607-723-1917

If at any time you have questions about your McIntosh

product, contact your McIntosh dealer who is familiar with

your McIntosh equipment and any other brands that may

be part of your system. If you or your dealer wish addi-

tional help concerning a suspected problem, you can re-

ceive technical assistance for all McIntosh products at:

McIntosh Laboratory, Inc.

2 Chambers Street

Binghamton, New York 13903

Phone: 607-723-3512

Fax: 607-723-3636

A polarized plug has two blades with one wider

than the other. A grounding type plug has two

blades and a third grounding prong. The wide

blade or the third prong are provided for your

safety. If the provided plug does not fit into your

outlet, consult an electrician for replacement of the

obsolete outlet.

18. Do not overload wall outlets, extension cords or inte-

gral convenience receptacles as this can result in a risk

of fire or electric shock.

19. To completely disconnect this equipment from the AC

Mains, disconnect the power supply cord plug from the

AC receptacle.

Care of Equipment:

20. Clean only with a dry cloth.

21. Do not permit objects or liquids of any kind to be

pushed, spilled and/or fall into the equipment through

enclosure openings.

22. Unplug the power cord from the AC power outlet

when left unused for a long period of time.

Repair of Equipment:

23. Refer all servicing to qualified service personnel. Ser-

vicing is required when the equipment has been dam-

aged in any way, such as power-supply cord or plug is

damaged, liquid has been spilled or objects have fallen

into the equipment, the equipment has been exposed to

rain or moisture, does not operate normally, or has

been dropped.

24. Do not attempt to service beyond that described in the

operating instructions. All other service should be re-

ferred to qualified service personnel.

25. When replacement parts are required, be sure the ser-

vice technician has used replacement parts specified by

McIntosh or have the same characteristics as the origi-

nal part. Unauthorized substitutions may result in fire,

electric shock, or other hazards.

26. Upon completion of any service or repairs to this prod-

uct, ask the service technician to perform safety checks

to determine that the product is in proper operating

condition.

Содержание C41





















Отзывы: