McIlwain Tissue Chopper Скачать руководство пользователя страница 2

Instructions for   

The  McIlwain Tissue Chopper

 

 
 

IMPORTANT 

 

The McIlwain Tissue Chopper must be fitted with a three-pin plug and only connected to an A.C. supply 
having a voltage corresponding to that marked on the appliance. When a fused plug is used it should be fitted 
with a 3 amp fuse, if in doubt consult a qualified electrician, since these instructions must be observed. 
The wires in the mains lead supplied with this appliance are coloured in accordance with the following code.
 

 

Green and Yellow 

Earth 

Blue 

  : 

 

 

Neutral 

Brown 

  : Live 

 
As these colours may not correspond with coloured markings identifying the terminals in your plug, connect as 
follows: 
The Green and Yellow to the terminal marked with the letter E or by the earth symbol  or coloured green and 
yellow. 
The Blue wire to the terminal marked N or coloured blue.  
The Brown wire to the terminal marked L or coloured brown. 

 

WARNING:  THIS APPLIANCE  MUST  BE  EARTHED 

 

Use the Tissue Chopper on a firm bench and do not restrict ventilation by using in a confined space. 
 
Clean the Tissue Chopper with a dry cloth, we do not recommend the use of solvents. To sterilise the blade 
holder, cutting table and plastic disc see “Operating Procedure”. 
 
If an object is accidentally dropped into the Tissue Chopper, immediately disconnect from the main electricity 

supply and retrieve the object. If the equipment has been dropped or damaged in any way, it should be checked 

before connecting to the mains supply. Similarly, although the equipment is lubricated for life, any work 

[especially involving the removal of covers] must be carried out by a competent Service Engineer. 

 
In the interest of safety, always use the equipment in the specified  manner.

 

 

BY NATURE OF ITS USE, THIS INSTRUMENT DOES NOT HAVE A GUARD AROUND THE 
CUTTING BLADE. IN THE INTEREST OF SAFETY, CARE MUST THEREFORE BE 
EXERCICESD WHEN USING THIS EQUIPMENT. AT ALL TIMES KEEP HANDS CLEAR OF THE 
BLADE AND CUTTING TABLE WHEN THE INSTRUMENT IS SWITCHED ON. WE 
RECOMMEND THE BLADE IS REMOVED WHEN THE APPARATUS IS NOT IN USE. 

 

 

 

 

 

 

 

 

Отзывы: