Purpose/Scope:
Rake Range Re-Assembly Instructions
Page
2
of
49
CLT01058
Only suitably qualified persons experienced in Mechanical
assembly and handling, should attempt to take on this task, so it’s
achieved in a safe manner.
Always wear clothing and safety equipment that is fit for the job at
hand. When conducting
re-assembly
or
maintenance work
always
support machine properly
, where possible always lower the
attachment or implement to the ground before working on the machine.
The crane or lifting device must be capable of lifting a minimum load
of 3 tonnes (3,000 kg). Only use chains or strapping that are rated for a
minimum load of 2.5 tonnes (2,500 kg) per chain or strap when using
the lift eye locations on the chassis.
Never go under a suspended machine or attempt to try and stop it if
moving erratically, death or serious injury may result. Always be
observant of people and objects around the suspended machine and do
not allow the machine to impact heavily on the ground after suspension
or movement.
The operator manual should be used along with these instructions for
full specifications.
Only competent persons
who have read and fully
understood the operator’s manual are qualified to operate this machine.
