manualshive.com logo in svg

MCH M3000i, Руководство пользователя

Поделиться
Скачать
MCH M3000i Скачать руководство пользователя страница 31

SERVICING YOUR GENERATOR

SPARK PLUG

 WRENCH

SPARK PLUG CAP

-31-

5. Inspect the spark plug. Replace it if the electrodes are worn or if the insulator is 
cracked, chipped, or fouled.
6. Measure the spark plug electrode gap with a wire-type feeler gauge. Correct the gap,
if necessary, by carefully bending the side electrode. The gap should be: 0.024-0.028 in 
(0.6-0.7 mm) 
7. Make sure that the spark plug sealing washer is in good condition, and thread the
spark plug in by hand to prevent cross-threading.
8. After the spark plug is seated, tighten with a spark plug wrench to compress the 
sealing washer.If reinstalling a used spark plug, tighten 1/8-1/4 turn after the spark plug 
seats.If installing a new spark plug, tighten 1/2 turn after the spark plug seats.

A loose spark plug can overheat and damage the engine. 
Overtightening the spark plug can damage
the threads in the cylinder head.
9. Reinstall the spark plug cap on the spark plug securely. 
10. Reinstall the spark plug maintenance cover.

NOTICE

SEALING WASHER

0.024 – 0.028

 in (0.6 – 0.7mm)

Spark arrester service

The spark arrester must be serviced every 100 hours to keep it 
functioning as designed. 

If the engine has been running, the muffler will be very hot. Allow 
the muffler to cool before servicing the spark arrester. 

Clean the spark arrester as follows

1. Loosen the cover screw and remove the spark arrester maintenance cover.
2. Remove the 4 mm self-tapping screw and the spark arrester. 
3. Use a brush to remove carbon deposits from the spark arrester screen. 
    Be careful to avoid damaging the screen.
    The spark arrester must be free of breaks and tears. Replace the spark arrester if it is 
    damaged.
4. Reinstall the spark arrester and spark arrester maintenance cover.

SPARK ARRESTER

SPARK ARRESTER 
MAINTENANCE COVER

COVER SCREW

Содержание M3000i








































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды