653-026
© Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Specifikations:
Hot-wire Sensor
Detection Range: 0,00 bis 2,00 Promille
Accuracy: ± 5% at 0,5 Promille
Preset Level: 0,5 Promille
Warm up time: < 10 Sec(Initial Warm-up 18
Sec)
Test-Time: < 8 Sec
Display: 3 Digital LCD
Batteries: 2x Micro (AAA)
Conditions: 0°C – 45°C < 95%RH Humidity
Dimensions: 102x37x20 mm
Weight: 50g incl. Batte
ries
Owners Manual
Alcohol-testing-unit „AT-22 digital“
Introduce
Dear customer,
we gratulate of getting your new
Home-Cinema-System!
With this choice you decited to a system which
combines a good design and clever technical features.
Please read the following instructions carefully to
have troubleless fun with the system!
Features
Alcohol-Testing-Measurement with LCD Display.
This System shows the alcohol-level according the
breath.
Savety Device
This measurement shows only the alcohol concentration according the breath.
Please advice that the measurement accuracy depents on the various human conditions.
Therefore please do not drink before drive any vehicle and rely on these system!
Please notice the right warm up time and conditions to get the right display.
Operations and Displays
Gas Entry
Alcohol Contents
LCD-Display
Warm-up
Level
Operating Knob
Battery Used up
Battery Room
Operation
Put in the batteries in the battery-room according the right polarity.
Now push operrating knob, the Display will show „Wait“ and the waiting time will count down.
After these the display will show „CCCC“ .
Now blow into the gas entry with a distance of 4 cm till the sound-signal is heard.
The alcohol level is now shown in the display.
After these the system will switch off automatically.
