24
Customer Helpline
0345 605 2063
WARNING!
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed by an authorised service
FHQWUHRUDVLPLODUO\TXDOL¿HGVSHFLDOLVWLI\RXFDQQRWVROYHWKHSUREOHP\RXUVHOI
Always turn off the machine and remove the plug before making any adjustment.
Troubleshooting
General Troubleshooting
The following table provides solutions to common problems encountered with the mower.
Fault
Possible Cause
Solution
Mower does not start
No power at mains socket
Check the fuse, switch,
socket, cable, wire and have
any repairs carried out by a
TXDOL¿HGHOHFWULFLDQ
Defective on/off switch
5HSDLUE\DTXDOL¿HG
technician required
Worn carbon brushes
Defective motor
Grass too long
Set at a higher cut setting. Lift
the front wheels slightly by
pressing down on the handle
bar.
Motor stops
Blade is blocked
Disconnect from mains and
remove blockage
8QWLG\¿QLVKPRWRUODERXUV
Cut height too low
Set a higher cut height
Blade blunt
Sharpen or replace the blade
Blade area blocked
Remove blockage
Blade assembled incorrectly
Install the blade correctly
Blade fails to turn
Blade blocked by grass
Remove blockage
Blade bolt loose
Tighten the blade bolt
Strange noises, rattling or
vibrations
Blade bolt loose
Tighten the blade bolt
Blade damaged
Replace the blade