MCE OptiBay Hard Drive for MacBook and MacBook Pro
4
Step 8.
Carefully move the cables situated on top of the optical
drive out of the way.
Step 9.
Carefuly remove the black speaker assembly from the
optical drive (it may be adhered to the drive, so be careful not to
damage it).
Step 10.
Remove the optical drive from its bay.
Note:
If you have the OptiBay enclosure without a hard
drive installed, now you should install your 2.5-inch SATA
hard drive into the enclosure and attach it using the four
screws included with the enclosure.
Step 11.
Remove the optical drive cable/connector from the opti-
cal drive and attach it to the OptiBay hard drive.
Step 12.
Insert the OptiBay
case into position inside the
system.
Step 13.
Replace the speak-
er strip on top of the OptiBay
hard drive and re-attach the
connectors onto the logic
board.
Step 14.
Replace the bottom case. Replace and tighten the eight
screws.
Step 15.
Replace the battery and the access door that covers the
battery and hard drive.
