McDonald's C602, Руководство пользователя

Страница: 83 / 114

81
Use the arrow keys to scroll to the appropriate month.
Press the Calibrate symbol to accept the selection.
(See Figure-206.)
Figure-206
Once the appropriate month has been entered, scroll to
the appropriate week. Press the Calibrate symbol to
accept the selection. (See Figure-207.)
Figure-207
Note: Scroll down to see selections FOURTH SUNDAY
and LAST SUNDAY.
Select the month that daylight saving time will end. Press
the Calibrate symbol to accept the selection.

(See Figure-208.)
Figure-208
Select the appropriate week that daylight saving time will
end. Press the Calibrate symbol to accept the
selection. (See Figure-209.)
Figure-209
Select the Calibrate symbol to exit the screen and
return to the Menu.
The
AUTO HEAT TIME screen allows the manager to set
the time of day in which the Heat Treatment cycle will
start. (See Figure-210.)
Figure-210
Note: Do not advance the AUTO HEAT TIME setting
except on the day the machine is brush-cleaned.
Increasing the time between Heat cycles will cause the
machine to soft lock if the start of the cycle does not
begin within 24 hours from the start of the previous Heat
Treatment cycle.
To set the AUTO HEAT TIME, select the Auto symbol
to move the arrow to Change. Then select the Calibrate
symbol . The screen will display the time with the
cursor under the hour position. (See Figure-211.)
Figure-211
Select the Auto symbol or the optional Flavor symbol
to increase or decrease the hour to the desired
setting. Then move the cursor to the minutes position by
selecting the Calibrate symbol . Adjust the setting for
minutes, then select the Calibrate symbol to save the
setting and return to the AUTO HEAT TIME screen.
Select the Calibrate symbol to exit the screen and
return to the Manager's Menu.
The
AUTO START TIME option allows the manager to
set the time of day at which the machine automatically
enters the Auto mode from the Standby mode. The
machine must be in the Standby mode without a freezer
lock condition in order to Auto start at the programmable
time. The AUTO START TIME can also be disabled to
require starting the Auto mode manually.

(See Figure-212.)
Figure-212
Enable AUTO START TIME by selecting the Auto symbol
to move the arrow up to Enable. Select the Calibrate
symbol to advance to the next screen.

(See Figure-213)
Figure-213