McDATA OPENconnectors, Руководство по интерфейсу командной строки

Страница: 145 / 170

Error Messages
Error Messages
A
A-23
Message Error 223: Unknown Error
Description The switch did not accept the request
Action Contact your service representative.
Message Error 224: Invalid Argument
Description One or more parameters are invalid for this command.
Action For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly by the CLI.
Message Error 225: Argument Does Not Contain All USASCII Characters
Description The CLI received non-USASCII characters.
Action For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly by the CLI.
Message Error 226: Argument Is Too Long
Description One or more parameters are invalid for this command.
Action For the appropriate parameters, see the section of the manual that
corresponds to the attempted command. Parameters must be typed
exactly to specification to be recognized correctly by the CLI.
Message Error 227: Invalid SNMP Community Name
Description The value entered for the SNMP community name is invalid
Action The community name must not exceed 32 characters in length.
Duplicate community names are allowed, but corresponding write
authorizations must match. Enter an appropriate SNMP community
name and re-submit.