background image

13

MAINTENANCE

IMPORTANT:

  Do not oil or grease the pivot points which 

have special nylon bearings.  Viscous lu bri cants will attract 

dust and dirt that will short en the life of the self-lu bri cat ing 

bearings. If you feel they must be lu bri cat ed, use only a 

dry, pow dered graphite type lu bri cant spar ing ly.

GENERAL RECOMMENDATIONS

The warranty on this riding mower does not cover items that 

have been subjected to operator abuse or negligence.  To 

receive full value from the warranty, operator must main tain 

riding mower as instructed in this manual.
Some adjustments will need to be made periodically to 

properly maintain your riding mower.
At least once a season, check to see if you should make 

any of the adjustments described in the Service and Ad-

justments section of this manual.
•  At least once a year you should replace the spark plug, 

clean or replace air filter, and check blade and belt for 

wear.  A new spark plug and clean air filter assure proper 

air-fuel mixture and help your engine run better and last 

longer.  

BEFORE EACH USE

1.  Check engine oil level.

2.  Check brake operation.

3.  Check tire pressure.

4.  Check operator presence and 

  ROS systems for proper operation.

5.  Check for loose fasteners.

/ILª$RIVEª#HAINS

ªª#HANGEªMOREªOFTENªWHENªOPERATINGªUNDERªAªHEAVYªLOADªORªINªHIGHªAMBIENTªTEMPERATURES

ªª3ERVICEªMOREªOFTENªWHENªOPERATINGªINªDIRTYªORªDUSTYªCONDITIONS

%

.

'

)

.

%

ªª2EPLACEªBLADEªMOREªOFTENªWHENªMOWINGªINªSANDYªSOIL

"%&/2%

%!#(

53%

%6%29

(/523

%6%29

(/523

%6%29

(/523

%6%29

(/523

%6%29

3%!3/.

"%&/2%

34/2!'%

2

)

$

)

.

'

ª

-

/

7

%

2

)NSPECTª-UFFLER3PARKª!RRESTER

#LEANª!IRª&ILTER

2EPLACEª!IRª&ILTERª0APERª#ARTRIDGE

2EPLACEª3PARKª0LUG

#HECKª%NGINEª/ILª,EVEL

#LEANª%NGINEª#OOLINGª&INS

#LEANª!IRª3CREEN

#HANGEª%NGINEª/ILª

#HECKª"RAKEª/PERATION

#HECKª4IREª0RESSURE

#LEANª"ATTERYªANDª4ERMINALS

-!).4%.!.#%ª

3#(%$5,%

#HECKªFORª,OOSEª&ASTENERS

#HECK2EPLACEª-OWERª"LADE

#HECKª4RANSAXLEª#OOLING

,UBRICATEª!XLESªANDª3PINDLES

#HE

#HECKª/PERATORª0RESENCEªª2/3ª3YSTEMS

CKª6"ELT

#HECKª-OWERª,EVELNESS

MAINTENANCE

Содержание M95-66XC

























Отзывы: