McCulloch B28 PS Скачать руководство пользователя страница 19

Страница: 19 / 27

English---19

115432326 Rev. 4 2/17/12

WORKING TECHNIQUES

Sweeping

The fan effect of the rotating line can be

used for quick and easy clearing up.

Hold the trimmer line parallel to and

above the area to be swept and move

the tool to and fro.

When cutting and sweeping you should

use full throttle to obtain the best results.

Cutting

The trimmer is ideal for cutting grass that

is difficult to reach using a normal lawn

mower. Keep the trimmer line parallel to

the ground when cutting. Avoid pressing

the trimmer head against the ground as

this can ruin the lawn and damage the

tool.

Do not allow the trimmer head to con--

stantly come into contact with the ground

during normal cutting. Constant contact

of this type can cause damage and wear

to the trimmer head.

WARNING:

Watch out for thrown

objects. Always wear eye protection.

Never lean over the cutting attach-

ment guard. Stones, rubbish, etc.

can be thrown up into the eyes

causing blindness or serious injury.

Keep unauthorized persons at a dis-

tance. Children, animals, onlookers

and helpers should be kept outside

the safety zone of 15 m.

Stop the machine immediately if

anyone approaches.

WARNING:

Sometimes

branches or grass get caught

between the guard and cutting

attachment or wrapped around the

shaft. Neither the operator of the

machine nor anyone else may at-

tempt to remove the cut material

while the engine is running or the

cutting equipment is rotating,

as this can result in serious injury.

Stop the engine and cutting equip-

ment before you remove material.

The bevel gear can get hot during

use and may remain so for a while

afterwards. You could get burned if

you touch it.

Содержание B28 PS




























Результаты поиска

Содержание B28 PS

Отзывы:

Похожие инструкции для B28 PS

Бренды по названию

Популярные бренды

McCulloch B28 PS, Руководство оператора

Результаты поиска

Содержание B28 PS

Отзывы:

Похожие инструкции для B28 PS

Бренды по названию

Популярные бренды