McCulloch 532 43 67-90 Скачать руководство пользователя страница 10

10

The op er a tion of any riding mower can  result in foreign objects thrown into the eyes, which can 

result in severe eye dam age.  Al ways wear safety glass es or eye shields while op er at ing your 

riding mower or per form ing any ad just ments or repairs.  We rec om mend a wide vi sion safe ty 

mask over spec ta cles or stan dard safety glass es.

00155

HOW TO USE YOUR RIDING MOWER

TO SET PARKING BRAKE 

Your riding mower is equipped with an operator presence 

sens ing  switch.  When engine is running, any attempt by 

the op er a tor to leave the seat without first setting the park-

ing brake will shut off the engine.

1.  Depress brake pedal all the way down and hold.

2.  Depress parking brake lever and re lease pres sure from 

brake pedal.  Pedal should re main in brake position.  Make 

sure parking brake will hold riding mower secure.

TO MOVE FORWARD AND BACK WARD 

The direction and speed of movement  is controlled by the 

motion control lever. 

1.  Start riding mower with clutch/brake pedal depressed 

and motion control lever in neutral (N) position.

2.  Move motion control lever to desired  po si tion. 

3.  Slowly release clutch/brake pedal to start  movement.

IMPORTANT:

  Bring riding mower to a complete stop before 

shifting or changing gears. Failure to do so will shorten the 

useful life of your transaxle. 

TO ADJUST MOWER CUT TING HEIGHT

The po si tion of the mower height deck lift le ver de ter mines 

the cut ting height.

•  Grasp lift le ver.

•  Press lift lever plunger with thumb and move lever to 

desired position.

The cutting  height  range is  ap prox i mate ly 1-1/2 to  4".  

The heights are measured from the ground to the blade tip 

with the engine not running.  These heights are approximate 

and may vary depending upon soil conditions, height of 

grass and types of grass being mowed.

•  The average lawn should be cut to approximately 2-1/2" 

during the cool season and to over 3" during hot months.  

For healthier and better looking lawns, mow often and 

after moderate growth.

•  For best cutting performance, grass over 6" in height 

should be mowed twice.  Make the first cut relatively 

high; the second to de sired height.

STOPPING 

MOWER BLADE

•  To stop mower blade, move deck clutch lever to disen-

gaged po si tion.

GROUND DRIVE

•  To stop ground drive, depress  brake pedal all the way 

down.

ENGINE 

•  Turn ignition key to “STOP” position and remove key.  

Always remove key when leaving riding mower to prevent 

un au tho rized use.

IMPORTANT: 

 Leaving the ignition switch in any position 

other than "STOP" will cause the battery to discharge and 

go dead.

NOTE:

  Under certain conditions when riding mower is 

standing idle with the engine running, hot engine exhaust 

gases may cause “browning” of grass.  To eliminate this 

possibility, always stop engine when stopping riding mower 

on grass areas.

 CAUTION:

  Always stop riding mower com plete ly, as 

described above, before leav ing the operator's position.

Motion 

Control 

Lever

Mower Height 

Adjustment

Brake Pedal 

"Engaged" 

Position

Deck Clutch Lever 

"Engaged" Position

Deck Clutch Lever 

"Disengaged" 

Position

Brake Pedal 

"Drive" Position

Parking Brake 

Pedal-Push Down to 

"Engage"

TO OPERATE MOWER

Your riding mower is equipped with an operator presence 

sensing switch.  Any attempt by the operator to leave the 

seat with the engine running and the deck clutch engaged 

will shut off the engine. You must remain fully and centrally 

positioned in the seat to prevent the engine from hesitating 

or cutting off when operating your equipment on rough, 

rolling terrain or hills.

Mower Height 

Adjustment High 

Position

Mower Height 

Adjustment Low 

Position

Deck Clutch Lever "Disengaged" 

Position

Deck Clutch Lever "Engaged" Position

OPERATION

Содержание 532 43 67-90

























Отзывы: