CartCleaner UV
7
PACKAGING and UNPACKING
CartCleaner UV is supplied and delivered completely assembled.
The packaging made with wooden pallet, covered and protected by heat shrink plastic wrap.
Two ties, strapped on the long side and one on the short side to secure the machine to the pallet.
To remove the machine
, proceed as follows:
Cut the tyings, remove the protection plastic film wrap.
Lift the machine from the pallet and place it on the ground.
Place the machine in the work area.
Dispose of the packaging according to the regulations in place.
TRANSPORT AND INTERNAL HANDLING
Transport must be carried out by qualified personnel with suitable means.
The machine, even if packed, must be transported so as to avoid any damage to its parts.
The lifting of the machine must be carried out using forklifts suitable for the type of pallet.
For internal handling, precautions as described above must be used.
To facilitate the positioning of the machine in the work area, with manual pallet trucks, the
machine is provided with special gripping bars that facilitate handling.
Once the machine is positioned, the bars must be removed.
INSTALLATION
CartCleaner UV does not need any particular installation operations.
The machine is ready for use, simply connect it to a power source by connecting it directly to a
power outlet compliant with current safety standards.
It is the responsibility of the user to connect the machine to a compliant power supply system,
with an effective and verified grounding system, both with certification of conformity.
The machine must be connected directly to the power supply socket without the use of
extension cables or adapters.
