McConnel SR460 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 128

McConnel SR460 Скачать руководство пользователя страница 8

SR460/620/820 Flexwing Rotary Mower

This manual covers the SR460/620/820 series of trailed flexwing rotary mowers which are
available in 4.6m, 6.2m and 8.2m cut widths.

They are all fitted with hydraulic rams which provide a flexwing folding ability making the
machine legal for road transportation.

These trailed heavy-duty machines can be specified with various specifications of axle,
wheel and blade combinations to suit the end users specific requirements.

These machines are fitted with 1000 rpm as standard (540 rpm is optional on SR460) and
are available with various input shaft and hitch options.

It is essential that the safety guards and chains are always fitted during operation and that
the machine is operated in line with the procedures and practices detailed in this manual.

This operator’s manual should be regarded as part of the machine. Suppliers of both new and

second-hand machines are advised to retain documentary evidence that this manual was provided

with the machine.

This machine is designed solely for ground vegetation control and must not be used for any other

purpose. Use in any other way is considered as contrary to the intended use. Compliance with, and

strict adherence to, the conditions of operation, service, and repair, as specified by the manufacturer,

also constitute essential elements of the intended use.

This machine should be operated, serviced, and repaired only by persons who are familiar with its

characteristics and who are acquainted with the relevant safety procedures.

Accident prevention regulations, all other generally recognised regulations on safety and

occupational medicine, and all road traffic regulations must always be observed.

Any arbitrary modifications carried out to this machine may relieve the manufacturer of liability for any

resulting damage or injury.

It is potentially hazardous to fit or use any parts other than genuine

McConnel

parts.

The company disclaims all liability for the consequences of such use which, in addition, voids the

machine warranty.

«
...
6
7
8
9
10
...
»

Содержание SR460

































































































































Отзывы:

Нет отзывов