McConnel SR420 Скачать руководство пользователя страница 17

 

 

3

SAFETY 

 

WARNING!

  While the tractor is running all personnel should keep well clear of the area 

around the machine as there are numerous crushing, shearing, impact dangers 
caused by the machine operation. 

 

DANGER!

  Do not operate with wings raised off the ground. Operating with the wings 

raised exposes the blades and can cause objects to be thrown and there is also 
danger of entanglement in or being hit by rotating blades. 

 

DANGER! 

Do not work under a wing in the raised position unless it is supported on blocks 
or propped. A sudden or inadvertent fall by one of these components could 
cause serious injury or even death. 

 

DANGER! 

These machines are capable under adverse conditions of throwing objects 
great distances at high velocity. CHECK the blades for wear and the 
attachment bolts for tightness every day during work .A few moments whenever 
the machine is stopped, e.g. whenever removing obstructions, will help reduce 
blade wear or loss. 

 

DANGER!

  Keep your forward speed to a level appropriate to the operating conditions. 

High-speed manoeuvres are very dangerous, particularly on uneven ground 
where there is risk of overturning. 

 

DANGER!

   Keep a careful watch for passers-by who may inadvertently get in the way of cut 

material being ejected from the machine. These machines are capable under 
adverse conditions of throwing objects great distances at high velocity. Stop the 
blades until all people are well clear. 

 

WARNING! 

Extreme care should be taken when operating near loose objects such as gravel, 
rocks, wire, and other debris. Inspect the area before mowing.  Foreign objects 
should be removed from the site to prevent machine damage and/or bodily 
injury or even death.  Any objects that cannot be removed must be clearly 
marked and carefully avoided by the operator. Stop mowing immediately if 
blades strike a foreign object.  Repair all damage and make certain the blade 
and carrier are still balanced before resuming cutting operations. 

 

WARNING! 

Transport the machine only at safe speeds. Serious accidents and injuries can 
result from operating this equipment at unsafe speeds 

 

DANGER!

   When the wings are folded for transport, the centre of gravity is raised and the 

possibility of overturn is increased.  Turn slowly and with extra care on hillsides.  
Overturning the mower could cause the mower to overturn the tractor and vice 
versa.  Never fold wings on a hillside, the mower may overturn 

 

WARNING! 

Do not transport unless wings are well secured in the transport position. Wings 
that are not well secured can fall during transport, causing serious damage to 
the tractor and mower and possibly causing the operator or passers by to be 
injured or killed. 

 

WARNING! 

Release hydraulic pressure from the rams before attempting maintenance. Lower 
the machine to the ground and lower the wings or securely block up, disengage 
the PTO and turn off the engine. 

 

DANGER!  

Do not operate this Equipment with hydraulic oil leaking. Oil is expensive and its 

presence could present a hazard.  Do not check for leaks with your hand!  Use a 
piece of heavy paper or cardboard.  High-pressure oil streams from breaks in the 
line could penetrate the skin and cause tissue damage including gangrene.  If oil 
does penetrate the skin, have the injury treated immediately by a physician 
knowledgeable and skilled in this procedure. 

 

Содержание SR420

































Отзывы: