971-012
P2007 Jens Broecking © Firma WJG, Braunschweig. Nachdruck oder Vervielfältigung nur mit ausdrücklicher Genehmigung
Installation:
•
Remove the detecting coil, the display device, the telescopic rod and the arm rest from the packing.
•
Insert the telescopic rod into the connecting joint of the detecting coil and fasten the interlock.
•
Insert the other side of the telescopic rod into the connecting joint of the display device and fasten the
interlock.
•
Insert the arm rest into the connector of the handle and fasten the interlock.
•
Adjust the telescopic rod and the arm rest that you can hold the metal detector comfortably.
•
Wind the cable of the detecting coil around the telescopic rod and plug it to the terminal of the display
device. Avoid tensile load on the cable.
•
Insert one battery into the small compartment on the backside and two batteries into the bigger one.
Check the batteries regulary.
•
The different acoustic signals can be listen to either through the integrated speaker or –optional- with
earphones.
