MCC iPort/USB 2, Руководство пользователя

Страница: 17 / 23

12
6. Hardware Set-Up
This section provides information on connecting the I
2
C adapter to your host
computer and I
2
C Bus target system.
1. USB Connection
After completing the Driver Installation instructions above, plug the
iPort/USB 2 adapter into a free USB port on your host computer or self-
powered USB hub. If this is the first time the iPort/USB 2 is connected to the
host computer, the operating system will automatically install the VCP driver
and assign the iPort/USB 2 a communications port address (COMn, /dev).
You can find the ComPort number assigned to the iPort/USB 2 by running the
iPort Utility Pack Message Center or Message Manager software, and
selecting the iPort/USB 2 device, use Windows Device Manager (Start |
Settings | Control Panel | System | Device Manager | Ports (COM & LPT)), or
use the OS X or Linux ls /dev command to find the communications port
address assigned to the iPort/USB 2.
2. I
2
C Bus Connection
Connect the I
2
C Bus cable to the I
2
C adapter and your I
2
C device. You can
make this connection with the I
2
C Mini Clip-Lead cable or I
2
C Mini Interface
Cable.
The I
2
C Bus interconnect includes 5 wires, Clock (SCL), Data (SDA), Ground
(GND), /INTerrupt (/INT), and +V. The minimum connection for I
2
C Bus
communication is Clock, Data, and Ground. You may not need to, or want to,
connect the additional wires to your target system. Refer to the “Hardware
Configuration” sections for details.
If you have any questions on I
2
C adapter setup and configuration, please visit our
FAQ page (http://www.mcc-us.com/faq.htm), or contact our technical support team
(
support@mcc-us.com).