7
Connect the computer to the Web
Management Console
This process assumes that you are setting up your UTM Firewall
device in bridged mode, sitting between your computer and the LAN,
and transparently filtering network traffic.
NOTE:
If you are setting up your UTM Firewall device in NAT
(masquerading) mode, or connecting directly to your ISP, refer to the
McAfee UTM Firewall Administration Guide
, which is included on the
UTM Firewall CD (
\doc\UserManual.pdf
).
The UTM Firewall device ships with the following initial network
settings:
• IP address –
192.168.0.1
• Subnet mask –
255.255.255.0
To set up communication between UTM Firewall and your computer,
modify your network settings:
1
From the
Start
menu, open the
Control Panel
, and double-click
Network Connections
.
2
Right-click
Local Area Connection
(or the appropriate network
connection for the newly installed PCI appliance)
icon, and select
Properties
.
3
Select
Internet Protocol (TCP/IP)
, and click
Properties
.
4
Select
Use the following IP address
(
Figure 2
).
uf_SG640_qig_700-2239A00_en-us.fm Page 7 Monday, October 12, 2009 12:06 PM
