McAfee® IntruShield® IPS 4.1
Preface
IntruShield Sensor 4000 Product Guide
Audience
•
Chapter 4: Attaching Cables to the I-4000 Sensor (on page
18
) describes
how to attach monitoring and response cables to the sensor, and how to
cable the sensor to operate in various operating modes.
Audience
This guide is intended to be used by network technicians and maintenance personnel
who are responsible for installing, configuring, and maintaining this IntruShield
sensor, but not necessarily familiar with IPS-related tasks, the relationship between
tasks, or the commands necessary to perform particular tasks.
Conventions used in this guide
This document uses the following typographical conventions:
Convention
Example
Terms that identify fields, buttons,
tabs, options, selections, and
commands on the User Interface
(UI) are shown in
Arial Narrow
bold
font.
The
Service
field on the
Properties
tab specifies the
name of the requested service.
Menu or action group selections
are indicated using a right angle
bracket.
Select
My Company > Admin Domain > View Details.
Procedures are presented as a
series of numbered steps.
1. On the
Configuration tab
, click
Backup
.
Names of keys on the keyboard
are denoted using UPPER CASE.
Press ENTER.
Text such as syntax, keywords,
and values that you must type
exactly are denoted using
Courier New
font.
Type:
setup
and then press ENTER.
Variable information that you must
type based on your specific
situation or environment is shown
in
italics
.
Type:
sensor-IP-address
and then press ENTER.
Parameters that you must supply
are shown enclosed in angle
brackets.
set sensor ip <A.B.C.D>
vi
