Using OEM board monitor for menu navigation and
control
The following instructions refer to controls described in section “Using
Board Monitor Display to Control TV functions” on page 6. Mind that the
names by which we refer to them differ from what appears on your
board monitor, so please use the above mentioned picture to guide
your through the following steps.
•
Press
Menu
to enter and
Exit
to exit the menu
•
Navigate by using left/right arrows
•
Select desired submenu by pressing rotary button
•
Navigate submenu by means of rotary button
•
Once you get to desired option, change value by pressing left/right
arrows
The following apply to USB Multimedia submenu only:
General controls:
•
Hierarchical folder structure. Press rotary button to view folder
contents.
•
Once you get to the desired file, select it by pressing rotary button
•
By default, audio/video file plays in preview mode. For full-screen
mode, press
Fav/Red
.
•
When viewing self recorded video streams, press
Pause/Blue
to pause
Start/Stop Recording:
•
Press
Record Tv
and recording starts.
•
While recording a channel, you can switch to watching programs,
provided they are from the same transponder
•
If you try to navigate outside current transponder, you will not be
allowed to continue navigation (Screen goes black and the text
'Recording' is displayed). Navigate back to previous channels.
•
End recording by first navigating back to the program you are
recording and then pressing
Exit
. The recording will then be saved to
on your USB stick.
Delete recording:
9
