E Series – E100 Operating Instructions
Page 5
THANKS
Thank you for choosing an E Series amplifier for your application.
Please spend a little time reading through this manual, so that you obtain the best possible
performance from the unit and become familiar with its operating requirements.
All MC
2
products are carefully designed and engineered for cutting-edge performance and
world-class reliability. If you would like further information about this or any other MC
2
product, please contact us.
We wish you many years of service from this amplifier and look forward to hearing from you
in the near future.
INTRODUCTION
The most powerful four channel amplifier MC
2
has ever made, the E100 has been designed
to meet demands for higher power and increased efficiency, whilst still maintaining
the renowned sonic qualities and unsurpassed reliability associated with all our amplifiers.
Proprietary class-D technology with a dual feedback loop system gives exceptional transient
response and a resonant switch mode power supply with a large reservoir gives extremely
high peak power without any “bass sag”.
Newly designed limiters, linked to the output current monitors and power supply, keep mains
input and output currents within a safe operating area at all times, whilst maintaining
transparent sonic performance.
Running cool in even the most difficult conditions, the E100 can deliver over 2500W into 4
ohms with all channels driven, and a massive 2 x 7400W bridged (4R), with outstanding
distortion and noise figures right up to maximum output.
The amplifier, of course, includes full DC, VHF, thermal and short circuit protection to ensure
continuous trouble-free service.
