MC Smart Controls FL-1000, Руководство по эксплуатации продукта

Страница: 4 / 10

4
Communicating with the FL-1000
There are two ways to communicate with the FL-1000 over WIFI:
Option 1: Connect to the FL-1000 as a WIFI network

W hile standing within 50 feet of the FL-1000 unit with a smart device. Look for local WIFI
network named FL-1000_xxxxxx = the last four characters of the specific FL- 1000’s MAC address.
Example: FL-1000_030768. See Diagram 1 Below.

Select the FL-1000 network and enter the default password “ FL- 1000” This will connect you to
the unit and allow you to configure or control the unit directly. The default IP for this network is
“192.168.4.1.”

Once your are connected to the FL-1000 user interface you can choose to connect the device to
your local WIFI network.
Option 2: Connect to Local WIFI Network:

While connected to the FL-1000 via the on board WIFI network, go down to the communications
tab at the bottom of the screen. This will take you to the communications set up page.

Under the “Network Profile” scroll down menu select “Connect unit to internet via WIFI”Select
the “Wifi Network Scan” button and a list of all the local WIFI networks will appear.

Select the network that you would like to join.

Choose the security and enter the password. Hit save and the FL-1000 will connect to the
network and it will show up with a check mark when it is connected. See Diagram 2.
Diagram 1 Diagram 2