MC Crypt DJ-80, Инструкция по эксплуатации

Страница: 32 / 81

32
Connection
Before connection, disconnect the mixing desk and all other devices which are to be connected
to the mixing desk from the mains voltage (pull mains plug out of the socket).
For connecting the cinch in and outputs, use only shielded cinch cables suitable for this
purpose. For connecting the microphone input, please only use a suitable microphone cable.
Using incorrect cables may lead to interference.
To avoid distortion or mismatching which may damage the mixing desk, only connect output
devices with a cinch output to the cinch inputs of the mixing desk. Only devices with cinch
inputs may be connected to the mixing desk’s cinch outputs.
For this, observe also the connection values in the section “Technical Data”.
The following applies for all cinch connections:
• The white cinch jack on the mixing desk is the jack for the left channel.
• The red cinch jack on the mixing desk is the jack for the right channel.
a) Connecting the inputs
INPUT CD1/2 and LINE1/2 (27)
There are altogether four stereo cinch inputs available to which you can connect your playback devices, e.g. tuner,
CD player, MP3 player, etc. These inputs are only suited for connecting playback devices with line level.
The inputs are not suitable for record players.
INPUT PHONO1/2 (26)
There are altogether two stereo cinch inputs available to which you can connect your record players.
These inputs are not suited for LINE playback devices, e.g. CD players, tuners, etc.
MICROPHONES connection (18)
You can connect your microphone to this input. It is suited for dynamic or capacitor microphones with own power
supply and XLR or jack plugs.