Operating Instructions
Operating Instructions
These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, micro
fi
lming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
© Copyright 2013 by Conrad Electronic SE.
Intended Use
The clip-on/boundary microphone is intended to convert acoustic signals (sound waves) into
electrical signals.
The low-level audio output signal may be connected only to suitable microphone inputs of audio
devices.
Any use other than as described above may lead to damage to the product and may also be
dangerous.
This product complies with the applicable national and European regulations.
All names of companies and products are the trademarks of the respective owners. All rights
reserved.
The safety instructions have to be followed without fail.
Safety Instructions
The warranty will be void in the event of damage caused by failure to observe
these safety instructions. We do not assume any liability for any resulting
damage.
We shall not accept liability for damage to property or personal injury caused
by incorrect handling or non-compliance with the safety instructions. In such
cases, the warranty will be null and void.
An exclamation mark indicates important notes in these operating instruc-
tions, which should always be observed.
• For safety reasons, any unauthorised conversion and/or modi
fi
cation to the product are not
permitted.
• Operate the microphone via a device with phantom powering (1-10 V/DC) only.
• When connecting the microphone, pay attention to the safety instructions of the device to
which it is to be connected.
• Do not expose the product to high temperatures, strong vibrations, dripping water or water
spray.
• Use the product only in a temperate climate, never in a tropical climate.
• Don’t leave packaging materials lying around carelessly; they maybe become a dangerous
plaything for children.
• In commercial institutions, the accident prevention regulations of the Employer’s Liability In-
surance Association for Electrical Systems and Operating Facilities are to be observed.
• If in doubt about how to connect the product correctly, or should any questions arise that are
not answered in these operating instructions, please contact our technical advisory service or
another specialist.
Features
The Mc Crypt clip-on/boundary microphone is a high-quality condenser microphone for voice
recording.
With the provided holder, it can be used as a boundary microphone or as a lapel microphone.
The microphone is equipped with the following features:
• Flexible use
• Pleasant and comfortable to wear
• Low inherent noise
• Wide frequency spectrum
Getting Started
Before using the product, please read the complete operating instructions
thoroughly in order to ensure its proper functioning.
To avoid distortion or mismatching, which could damage the microphone or
the connected audio device, the microphone may be connected only to sui-
table microphone inputs. To do this, please pay attention to the connection
data in the „Technical data“ section.
Never point the microphone at the speakers in your loudspeakers, since this
may lead to interference, which could damage the loudspeaker and the con-
nected ampli
fi
er.
°
• Attach the microphone to a clean, smooth and level surface with the self-adhesive holder, or
clip it to your clothing with the built-in lapel clip. Avoid adhering the holder below an ambient
temperature of +15 °C.
• Connect the connection cable to the microphone input of your audio device (e.g. bodypack or
sound card of your computer).
• Turn down the volume completely for the microphone input of the audio device.
• Connect the microphone to the microphone jack of the audio device.
• Please adapt the sensitivity of the microphone input by using the corresponding input level
control for the microphone (see the instructions for the audio device).
Disposal
Electronic devices are recyclable waste materials and must not be disposed of in
the household waste!
Dispose of any unserviceable products in accordance with the relevant statutory
regulations.
Technical Data
Impedance
1 kOhm ± 30% (@1 kHz)
Frequency range
50-13000 Hz
Sensitivity
-68 dB ±3 dB (0 dB = 1 V/
μ
bar @1kHz)
Polar patterns
Sphere
Phantom powering
1-10 V/DC
Frequency response
Polar patterns
Version 04/13
Clip-on/Boundary Microphone
Item No. 18 97 27
