- 3 -
On-Board System Menu
The
L
EDBRITEPACK
comes
with
an
easy
to
navigate
system menu.
This next section will detail the
functions of each command in the system menu.
Please read the next section thoroughly!
To access the main menu press the ESC button. Press the UP or DOWN buttons until you reach
function you wish to change. When you reach the function you wish to change press the ENTER
button
.
When a function is selected use the
UP or Down buttons to change the function settings.
Once your changes are made press the ENTER button,
Addr
-
DMX Address Setting via control board and
moter sstting
1. Press the ESC button and UP button or DOWN button
until “Addr” is displayed, press ENTER.
2. “Axxx” will now be displayed, “x” represents the
displayed address. Press the UP or DOWN buttons to
find your desired address.
Auto
-
This menu will let you select your desired
auto mode
1.
Press the ESC button and UP button or DOWN button
until “Auto” is displayed, press ENTER.
2. “Autx” will now be displayed, You can confirm auto
modes by UP or DOWN.
3. Then press ENTER, “sp x” will be displayed ,
“x”
representing a number between 1-9. Press the UP or
DOWN buttons to set the auto speed.that ,
soun
-
This menu will let you select your desired
sound mode
1 . Press the MENU button until “Soun” is displayed,
press ENTER.
2 .“Soux” will now be displayed, You can confirm three
modes by UP or DOWN for sound mode. “
x”
representing a number between 1-3.
Then press the
ENTER.
3 . “sp x” will be displayed ,
“x” representing a number
between 1-9. Press the UP or DOWN buttons to set the
sound speed.that ,
ChAS
-
This menu will let you select your desired
chase mode
1.
Press the ESC button and UP button or DOWN button
until “ChAS” is displayed, press ENTER.
2. “C x” will now be displayed, You can confirm chase
modes by UP or DOWN.
3. Then press ENTER, “sp x” will be displayed ,
“x”
representing a number between 1-9. Press the UP or DOWN buttons to set the chase speed.
Colo
-
This menu will let you select your desired colour mode
1.
Press the ESC button and UP button or DOWN button
until “CoLo” is displayed, press ENTER.
2.Either “CoL X”, “X” representing a number between 1-9 or “AtF ” will be displayed. Press the UP or DOWN
buttons to select either a static color or “AtF ” mode. If you select “AtF ”,and press ENTER and it will be set
the
Red brightness., the green brightness and blue brightness.
Chnd
-
This menu will let you select your desired DMX Channel mode.
1.
Press the ESC button and UP button or DOWN button
until “Chnd” is displayed, press ENTER.
