Carriage Base
Support
Strut
Safety Pin
Platform Base
Platform Back/Flap
Tab Holes
Safety Pin
Carriage Base
Step #3
Flip the carriage base over so that it lays
flat on top of the carriage base
Align the platform back/flap tap holes
with the carriage holes.
Insert 5/16”x 1” bolt through back/flap
tap holes and carriage base, Tighten nylock nut
with the bolt. Do not over-tighten nyloc nut so
tight as to prevent free movement.
Repeat for the other side.
Step #4
Fold the platform back/flap down,
lift the carriage base up 90 degrees
to both back/flap and platform base.
Position support strut with tab over the
carriage base tab as shown.
Insert safety pin. Insert safety pin
between the platform base and strut
as shown right.
Repeat for the other side.
Platform
Base
