WARNING
ATTENTION!! Read and understand all instructions carefully
before operating equipment.
INJECTION HAZARD
This equipment generates very high fluid pressure. Spray
from the gun, leaks or ruptured components can inject fluid
through your skin and into your body and cause extremely
serious bodily injury.
The spray gun should never be handled carelessly, nor
spray directed toward any part of the body. Keeps your hands
and fingers away from spray gun nozzle.
Be sure equipment safely devices are operating properly
before each use.
If any fluid appears to penetrate your skin, get emergency
medical care at once. Do not treat as a simple cut. Tell the
doctor exactly what fluid was injected.
FIRE HAZARD
Static electricity is created by the high velocity flow of
fluid through the pump and hose. If every part of spray
equipment is not properly grounded, sparking immediately.
Check the entire system for positive grounding.
GROUNDING
Before starting to work the pump must be connected to
ground:
INDEX:
WARNINGS ............................................................
TYPICAL INSTALLATION ....................................
PRESSURE RELIEF PROCEDURE ........................
HOSE SAFETY .....................................................
SPRAY GUN & OPERATING INSTRUCTIONS .......
MAINTENANCE (CLEANING AND FLUSHING) .....
SPRAY TIPS
......................................................
PARTS DRAWING AND LIST
....................
TROUBLESHOOTING GUIDE
..........................
TECHNICAL DATA
.............................................
STANDARD SPRAY TIPS
...................................
WARRANTY
......................................................
2
3
3
3
3
3
4
4, 5 & 6
7
7
7
8
2
The pump must be connected to ground with a
ground wire which is supplied with the pump
(4 mm
2
of section and a clamp). See connection
on page 6.
SPRAY GUN: Obtain grounding through
connection to a properly grounded fluid hose and
pump.
OBJECT BEING SPRAYED: Use ground wire
and clamp.
AIR COMPRESOR: Follow air compressor
manufacturer’s recommendations.
Use ONLY METAL PAILS, which are
conductive. Do not place the pail on a
non-conductive surface, such as paper or
cardboard, which interrupts the grounding
continuity.
1.-
2.-
3.-
4.-
5.
-
