17
enter ”
*
” to skip the ANS play, and then
enter the CBT code, a two-beep alarm tone
will be heard if the code is correct.
3.
The CBT function if it exceeds 45 seconds. it
will then enter ICM recording in “ANSWER &
RECORDS” mode, or ends on-line operation
in “ANSWER ONLY” mode or in “SYSTEM
STANDBY” mode.
4.
The corresponding touch tone commands are
as follows:
End CBT function — press ”
*8
”.
Repeat CBT —
press CBT
code
+”
*
”.
The CBT code is initially preset to ”
267
”. You
can change the code to any 3 digits from 000 to
999. The procedure of CBT code setup/display is
as follows:
1.
Press the (
) key for about 2 seconds and
release to display CBT code.
The code display/setup will be high digit first,
then middle digit, and the low digit.
2.
Press the (
) key or the (
) key to
increase or decrease the digit.
3.
Press the (
ANS
) key to select the correct digit.
4.
Repeat step 2 and 3 to change following digit
setup.
5.
If a keypress exceed 8 seconds, the setup/dis-
play procedure will be aborted.
6.
Press the (
) key to quit the CBT code set-
up/display.
OPERATION
