MBM EZF-200 Скачать руководство пользователя страница 20

Страница: 20 / 24

7. Troubleshooting

Trouble Possible

Cause

Measures

The paper does
not feed properly

Recently printed paper sticks
together

Jog the paper sufficiently. Make sure that
the ink is dry.

Stains on the paper separator

Clean the paper feed separator using
appropriate cleaner.

Stains on the paper feed rubber
roller

Clean the dust or ink on the paper feed
roller using appropriate cleaner.

The paper separator is worn out

Install a new paper separator.

The volume of the paper stacked on
the paper feed table is not enough

Add more paper to the feed table – at least
20 sheets or more.

The machine does not
operate even after the
START/STOP key is
pressed

Paper jam inside the unit

Detach Table 1 and 2 and remove the
jammed paper from the unit.

Wrinkles appear on
the paper

Recently printed paper sticks
together

Jog the paper sufficiently. Make sure that
the ink is dry.

Stains on the paper separator

Clean the paper separator using an
appropriate cleaner.

Stains on the paper feed roller

Clean the dust or ink on the paper feed
roller using an appropriate cleaner.

Stains on paper fold rollers

Clean all four fold rollers using an
appropriate cleaner.

Tables 1 and 2 are not properly set

Reset properly.

Paper jam in Table 1 and 2

Detach Table 1 and 2 and remove the
jammed paper.

Improper fold
position

The length of the paper is not
standard size

Measure the length of the paper and adjust
using the fine adjustment knob.

Printed paper
(13 lbs bond or
lighter)
is not folded.

The surfaces of the fold rollers are
covered with dust or ink, causing
them to be slippery

Clean all four fold rollers using an
appropriate cleaner.

Low room temperature

Operate the machine in a
climate-controlled environment. Paper
should be at room temperature before
folding. Paper stored below 53F is not
recommended.

Содержание EZF-200

























Результаты поиска

Содержание EZF-200

Отзывы:

Бренды по названию

Популярные бренды

MBM EZF-200, Руководство по эксплуатации

Результаты поиска

Содержание EZF-200

Отзывы:

Бренды по названию

Популярные бренды