
E-METRÒ
USER MANUAL
p.
6
2.5 OTHER PROVISIONS
The first thing to do when starting use is to check the presence and integrity of the protections and the operation of the
safety devices. If you find any defects, do not use the pedal assisted bicycle!
2.6 UNPACKING AND SETUP
The pedal assisted bicycle is delivered fully assembled and in working condition.
2.6.1 SADDLE AND ADJUSTMENTS
Adjusting the height of the saddle is an essential prerogative for the correct use of the pedal assisted bicycle. Incorrect
adjustment can generate structural breaks in the frame.
Adjust the height of the saddle by activating the quick release mechanism (Ref. A - Figure 1). Check that the mechanism is
tightened before testing the seat and using the vehicle. Do not raise the saddle beyond the limit switch signal located in
the seat post (Ref. B - Figure 1).
SHELTERS
It is therefore strictly forbidden to modify or remove the guards,
controls, labels and information plates.
DANGER
DANGER
IMPORTANT WARNING:
For your safety, the seat post reference
mark (B) should never be outside the
tube where the seat post is inserted.
ATTENTION
ASSEMBLY
In the event that you do not have the ap-
propriate instrumentation for adjustment
or do not have the skills, contact the au-
thorized reseller.
FIG. 1