M-B Multi-Service Vehicle
Page 4.34
Operation
© 2008 M-B Companies Inc.
All Rights Reserved
Item #
Name
Description
1
Left Signal Indicator
Displays status of signal light or hazard lights, flashes bright green/gray at same rate if
left signal is enabled by column switch or hazard lights enabled. If neither enabled, the
indicator is dimmed.
2
Headlight High Beam
Indicator
Displays status of headlight high beam. Bright when high beam is selected from
column switch or when high beam
FLASH
is selected. Dim for low beam selection or
headlamps off.
3
Vehicle Drive Status
Displays Ground Drive Status. When in neutral, the arrow points both up and down,
the arrow color is gray, and the status letter indication is an “N”. If the drive is forward,
the arrow points up and if the drive is in reverse the arrow points down. If the Ground
Drive is in low speed the letter indication is a “L” and if high speed the letter indication
is a “H”. When the foot pedal is depressed initiating ground drive motion, the arrow
color changes to yellow.
4
Right Signal Indicator
Displays status of signal light or hazard lights, flashes bright green/gray at the same
rate as right signal if right signal is enabled by column switch, or hazard lights are
enabled. If neither enabled, the indicator is dimmed.
5
Fuel Gauge
Vertical bar graph filled with green to indicate the percentage of fuel in tank. When the
fuel in the tank is low, the color of the bar graph changes to red.
6
Hour Meter
Displays the number of hours of operation on vehicle engine. Nonresettable.
7
Engine RPM Analog
Display
Arc shaped display with gray background. Graphically displays engine RPM from 0 to
3000 RPM max. As RPM increases, arc fills with green color from left to right
indicating the percent of maximum RPM.
8
Vehicle Speed Analog
Display
Arc shaped display with gray background. Graphically displays vehicle speed MPH
from 0 to 30 max. As speed increases, arc fills with green color from left to right
indicating the percent of maximum vehicle speed.
9
PTO Enabled Indicator
Icon displayed in gray when PTO is not enabled. When PTO is enabled by operator,
icon changes to red and flashes at same rate as signal lights.
10
Aux Hydraulic Indicator
Text displaying
ACTUAL HYD GPM
the auxiliary pump is supplying at current engine
RPM. When the main auxiliary hydraulics (Aux 3) is not enabled, indicator displays the
actual hydraulic flow in gallons-per minute (GPM) at the current engine RPM. The
background in the indicator box changes to red and flashes at the same rate as the
signal lights when Aux 3 is enabled. GPM can be changed by going in System
Hydraulics page. Attachments selected can change maximum GPM and sets GPM to
a typical operating setting.
11
Engine RPM Display
Digital readout of current Engine RPM.
12
Engine Coolant Temp
Indicator
Horizontal bar graph on white background providing analog indication of coolant
temperature. Left edge of graph corresponds to 120
°
F (49
°
C), right edge of graph
corresponds to 240
°
F (115
°
C). When temperature is below 120, the bar graph is filled
with background color. As temperature rises the graph is filled with green from the left.
Text displaying current coolant temp on right side of graph.
13
Engine Oil Pressure
Horizontal bar graph on white background providing analog indication of engine oil
pressure. Left edge of graph corresponds to XXX psi. Right edge of graph
corresponds to ZZZ psi. When pressure is below XXX bar graph is filled with
background color. As pressure rises, graph is filled from left. Text displaying current oil
PSI on right side of graph.
14 Battery Voltage Indicator Horizontal bar graph on white background providing analog indication of battery
voltage. Left edge of graph corresponds to 9 volts. The right edge of graph
corresponds to 16 volts. When voltage is below 9 the graph is filled with background
color (Controller will not work). As voltage rises, graph is filled from left. Text displaying
current battery voltage on right side of graph.
Содержание Multi-Service Vehicle
Страница 2: ...5 19 10 PN 904 154502 ...
