OPERATION
8
POWER AND BASIC ADJUSTMENTS (Continued)
Alarm Operation
The alarm built into the unit functions as a wake-up alarm. It could also be used to automatically
turn the unit on at a specific time (such as a meal or evening time to relax).
In setting menu turn ALARM to
“ON” and set the wake-up alarm time (see below
Alarm
Time Setting)
. When the wake-up alarm time is set, the unit will generate a wake-up
beeping sound at the preset time. The beep sound stops when any key pressed.
Alarm Time Setting Procedure
When ALARM is set to
“ON”, the next menu item is ALARM SET.
Wait 2 seconds a
fter turning the alarm to “ON” and the HH (hours) flash. Rotate the
VOLUME/SEL
knob to set the hour. Next, press
VOLUME/SEL
knob. The MM (minutes)
flash. Rotate the
VOLUME/SEL
knob to set the minutes. Press the
VOLUME/SEL
button to
exit.
Sleep Operation
The sleep function built into the unit allows the user to set a specific time when the unit will
automatically turn off from 1-59 minutes later.
In setting menu setting turn SLEEP to
“ON” then set the sleep time (see below
Sleep Time
Setting)
. When the sleep time is set, the unit will power off automatically at the preset time.
Sleep Time Setting Procedure
When SLEEP is set to
“ON”, the next menu item is SLEEP SET.
Wait 2 seconds after turning sleep time
to “ON” and the sleep timer will flash. Rotate the
VOLUME/SEL
knob to set it between 01-59 minutes. Press
VOLUME/SEL
button to exit.
Clock Setting Procedure
The clock allows you to select between 12 or 24 hour time formats.
To set the 12 or 24 hour time format, advance to the “CLOCK” function in the settings menu
and rotate the
VOLUME/SEL
knob to choose the format.
To set the clock time, press and hold
DISP
button and the HH (hours) flash. Rotate the
VOLUME/SEL
knob to set the hour. Press
DISP
(or
VOLUME/SEL
) button until the MM
(minutes) flash. Rotate the
VOLUME/SEL
knob to set the minutes. Once complete, press
DISP
(or
VOLUME/SEL
) button to exit.
Preset (P_VOL) Setting
This function allows the user to set the volume level at which the unit powers up again depending
on what level was recorded when the unit was last turned off. This avoids surprise high volumes.
To set the P_VOL threshold,
advance to the “P_VOL” function in the settings menu and
rotate the
VOLUME/SEL
knob to choose the volume setting.
When the volume threshold at the time of unit turn off is
less
than P_VOL value, the next
time turns on the unit the volume will be the same as last time turned off.
When the volume threshold at the time of unit turn off is
greater
than P_VOL value, the
next time turns on the unit the volume will default to the lower P_VOL preset threshold.
