MB QUART NAUTIC NA180.2, Руководство по установке

Страница: 9 / 12

6-Channel Amplifiers
NA540.6
8
6 Channel Full Range Stereo
1. Interconnect cable checklist: 3. Crossover frequency control checklist:
Connect the 6 Inputs of the amplifier to a Radio/CD with quality RCA cables. N/A for full range operation.
2. Filter Switch: 4. Line Level:
- 1/2CH: FLAT Refer to section “Setting up systems after installation for best performance.”
- 3/4CH: FLAT
-5/6CH: FLAT
5 Channel Operation 2. Filter Switch:
This illustration shows how to use your 6 channel amplifier as a 5 channel unit by taking - 1/2CH: FLAT
advantage of the mono bridging capability on all NAUTIC amplifiers. - 3/4CH: FLAT
- 5/6CH: LOW
1. Interconnect Cable Checklist: 3. Crossover frequency control checklist:
- 1/2CH & 3/4CH: Connect the Inputs of channel pair ½ to a suitable stereo source N/A for full range operation. 5/6CH set to 80Hz.
with quality RCA cables. Repeat these steps for 3/4CH. 4. Line Level:
- 5/6CH: Connect a mono line Input via Y-adapter from a mono source or single Refer to the section “Setting up systems after installation for best performance.”
Left or Right RCA from a stereo source. This has been detailed on previous pages 5.Speaker Connections:
Connect the subwoofer - to Ch6- and the sub to Ch5+. Connect the remaining
for reference.
speakers in standard stereo wiring to CH1/2 & CH3/4. IMPORTANT: Do not connect Left and Right stereo signals together to achieve a mono
signal as this will damage the output stage of the source and possibly the input stage of
IMPORTANT: Minimum final loudspeaker impedance presented to the amplifier is
the amplifier therefore voiding your warranty. 4-Ohms in mono operation and 2-Ohms in stereo operation.
POWER INPUT
POWER INPUT
GND REM BA
TT+12V
GND REM BA
TT+12V
6CH 5CH
6CH 5CH
4CH 3CH 2CH 1CH
4CH 3CH 2CH 1CH
+ - + - + - + - + - + -
+ - + - + - + - + - + -
BRIDGED
BRIDGED
BRIDGED
BRIDGED
BRIDGED
BRIDGED
LINE OUTPUT
DIAGNOSTICS
MODE
POWER
PROTECT
CH-2
CH-1
CH-6 CH-4
CH-5 CH-3
CH-2
CH-1
2-CH 6-CH 4-CH
LINE INPUT
LEVEL FILTER FREQUENCY BASS EQ
6V . 2V
HIGH LOW FLAT
40Hz 250Hz 0dB 9dB
CHANNELS 1 & 2
CHANNELS 3 & 4
CHANNELS 5 & 6
LEVEL FILTER FREQUENCY BASS EQ
6V . 2V
HIGH LOW FLAT
40Hz 250Hz 0dB 9dB 6V . 2V
HIGH LOW FLAT
40Hz 250Hz 0dB 9dB
LINE
OUTPUT
LINE
OUTPUT
DIAGNOSTICS
DIAGNOSTICS
MODE
MODE
POWER
POWER
PROTECT
PROTECT
CH-2
CH-2
CH-1
CH-1
CH-6
CH-6
CH-4
CH-4
CH-5
CH-5
CH-3
CH-3
CH-2
CH-2
CH-1
CH-1
2-CH
2-CH
6-CH
6-CH
4-CH
4-CH
LINE
INPUT
LINE
INPUT
LEVEL
LEVEL
FIL
TER
FIL
TER
FREQUENCY
FREQUENCY
BASS
EQ
BASS
EQ
6V
6V
. 2V
. 2V
HIGH
HIGH
LOW
LOW
FLA
T
FLA
T
40Hz
40Hz
250Hz
250Hz
0dB
0dB
9dB
9dB
CHANNELS 1 & 2
CHANNELS 1 & 2
CHANNELS 3 & 4
CHANNELS 3 & 4
CHANNELS 5 & 6
CHANNELS 5 & 6
LEVEL
LEVEL
FIL
TER
FIL
TER
FREQUENCY
FR
EQUENC
Y
BASS
EQ
BASS
EQ
6V
6V
.
2V
.
2V
HIGH
HIGH
LOW
LOW
FLA
T
FLA
T
40Hz
40Hz
250Hz
250Hz
0dB
0dB
9dB
9dB
6V
6V
.
2V
.
2V
HIGH
HIGH
LOW
LOW
FLA
T
FLA
T
40Hz
40Hz
250Hz
250Hz
0dB
0dB
9dB
9dB
FEATURES:
- 3
Sets of RCA inputs
- LEVEL: Variable sensitivity from 0.2V to 6V
- BASS BOOST: Adjustable 45Hz bass boost from 0dB to 9dB
- X-OVER: Selects internal crossover functions
- FLAT: Bypasses all crossovers for full frequency operation
- LOW: Selects the built in LOW PASS filter
- HIGH: Selects the built in HI PASS filter
- POWER LED : Indicates the powered up and turned on condition
- PROTECTION LED : Indicates a high voltage, low voltage, short circuit,
hard clip, over heating or DC fault condition.
- MODE: “2” indicates one set of RCA’s are being used. This will also pass signal to channels 3/4 and 5/6 through
1/2 inputs. “4” indicates connecting 2 sets of RCA’s to 1/2 and 3/4 inputs. “6” indicates connecting 3 sets of
RCA’s to channels 1/2, 3/4 and 5/6.