6) USE
6) USE
6) USE
6) USE
This appliance has been designed SOLELY for grinding coffee beans. Any other use is
understood to be improper, and consequently hazardous. The manufacturer cannot be held
responsible for any damage as a result of improper or incorrect use.
Do not use the appliance for grinding other types of food, or anything else.
Do not use the doser (Grinder-Doser version) to store foods or measure them.
THE GRINDER-DOSERS, ELECTRONIC GRINDER-DOSERS AND COFFEE GRINDERS
MANUFACTURED BY OUR COMPANY ARE INTENDED FOR SKILLED PERSONNEL
ONLY FOR PROFESSIONAL USE AND NOT FOR HOUSEHOLD USE
NOT FOR HOUSEHOLD USE
NOT FOR HOUSEHOLD USE
NOT FOR HOUSEHOLD USE. The user must be an
adult.
Do not allow children or incapable persons to use the appliance.
7) INSTALLATION AND WIRING
7) INSTALLATION AND WIRING
7) INSTALLATION AND WIRING
7) INSTALLATION AND WIRING
The appliance must be installed by skilled technical personnel in conformity with the safety
rules in force. Incorrect installation may result in injury of persons or animals, or damage to
property, for which the manufacturer cannot be held responsible.
•
The appliance must be placed on a stable, flat surface (we recommend to install the
appliance at an height between 80 and 100 cm from the floor).
•
Before plugging in the appliance, make sure the voltage and frequency values of the supply
mains correspond to the ratings indicated on the label featuring the appliance’s technical data.
•
The wall socket must be fitted with an efficient earth contact. Consequently, it is essential to
make sure the earth system is efficient and in conformity with current safety rules. If in any
doubt, have the system thoroughly checked by personnel with the appropriate professional
skills.
IT IS COMPULSORY TO EARTH THE APPLIANCE.
The manufacturer cannot be held responsible in the event this regulation is not complied with.
•
It is essential to make sure the ratings of the system are suitable for the power absorbed by
the appliance - as indicated on the label featuring the technical data - and that the wall socket
is protected against overcurrents.
•
Do not use extension cables, plug adapters for multiple sockets or makeshift connections.
•
In EEC member countries, the regulation in force calls for the external equipotential terminal
on the outer part of the appliance’s base plate to be connected to a equipotential node if
the installation is to be correct.
•
The motor must rotate clockwise. If the rotation of three-phase motors is to be inverted, by
inverting the two power supply wires inside the plug, this must be carried out by skilled
personnel.
•
The appliance is suitable for indoor use only. Do not use the appliance outdoor.
•
Thoroughly clean the appliance at the first installation; follow the instructions in chapter 9 and
14.
•
Do not install the appliance near to water dispenser or similar product that could throw water
jet on the appliance.
4444
